• CuNi10 Alloy Wire for Precision Wire Wound Resistor
  • CuNi10 Alloy Wire for Precision Wire Wound Resistor
  • CuNi10 Alloy Wire for Precision Wire Wound Resistor
  • CuNi10 Alloy Wire for Precision Wire Wound Resistor
  • CuNi10 Alloy Wire for Precision Wire Wound Resistor
  • CuNi10 Alloy Wire for Precision Wire Wound Resistor

CuNi10 Alloy Wire for Precision Wire Wound Resistor

Product Type: Strip
Material: Cu/Ni
Carbon Content: No
Serves: Small Order Accepted
Sample: Sample Available
Transport Package: in Coil Cartons, Pallet, Spools, Coils
Customization:

Contact Supplier

Diamond Member Since 2008

Suppliers with verified business licenses

Basic Info.

Model NO.
CuNi Alloy Wire
Trademark
Tankii
Origin
China
HS Code
74082200
Production Capacity
2000tons/Year

Product Description

CuNi10 Alloy Wire For Precision Wire Wound Resistor

Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi20, CuNi23, CuNi25, CuNi30, CuNi34, CuNi44.
Wire/Rod/Bar diameter: 0.02mm-30mm
Strip: Thickness0.01~6.0width: 610Max
CuNi10, also known as Cuprothal 15, is a copper-nickel alloy (CuNi alloy) with medium-low resistivity for low temperature resistances. The alloy is suitable for use at temperatures up to 400°C (750°F).
CuNi10 is typically used for heating cables, fuses, resistors and various types of controllers.

Material: CuNi10(C70600) CuNi30(C71500) in from of sheet/plate/strip
CuNi10Fe1/C70600 Strip/sheet
Copper Nickels (Copper-Nickel), Copper-Nickel, (90-10). Excellent corrosion resistance, especially in marine environments. Moderately high strength, good creep resistance at elevated temperatures. Properties generally increase with nickel content. Relatively high in cost compared with copper-aluminum and other alloys with similar mechanical propert
Characteristic Resistivity ( 200C μ Ω . m) Max. working Temperature ( 0C) Tensile Strength (Mpa) Melting point (0C) Density ( g/cm3) TCR x10-6/ 0C (20~600 0C) EMF vs Cu (μ V/ 0C) (0~100 0C)
Alloy Nomenclature
NC035(CuNi30) 0.35± 5% 300 350 1150 8.9 < 16 -34
 
Mechanical Properties Metric Comments
Tensile Strength, Ultimate  372 - 517 MPa  
Tensile Strength, Yield  88.0 - 483 MPa Depending on temper
Elongation at Break  45.0 % in 381 mm.
Modulus of Elasticity  150 GPa  
Poissons Ratio  0.320 Calculated
Charpy Impact  107 J  
Machinability  20 % UNS C36000 (free-cutting brass) = 100%
Shear Modulus  57.0 GPa  
CuNi10 Alloy Wire for Precision Wire Wound Resistor
CuNi10 Alloy Wire for Precision Wire Wound Resistor
CuNi10 Alloy Wire for Precision Wire Wound Resistor

CuNi10 Alloy Wire for Precision Wire Wound Resistor

 

Send your message to this supplier

*From:
*To:
avatar Mr. Martin
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now