0cr13al4 Stainless Steel Strip Resistance Alloy Strip for Medical Machinery

• Product Type: Lump
• Material: FeCrAl
• Carbon Content: Low Carbon
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 0cr13al4
• PCD: 115mm
• ET: 25mm
• Hole: 8
• The highest temperature: 950ºC
• Melting point: 1500ºC
• density: 7.4G/M³
• hardness: 200~260HB
• Transport Package: Waterproof Paper, Wooden Case
• Specification: 0.1mm-30mm
• Trademark: TANKII
• Origin: Shanghai, China
• HS Code: 7408229000
• Production Capacity: 2000 Ton/Month
• Package Size: 50.00cm * 50.00cm * 20.00cm
• Package Gross Weight: 25.000kg

Product Description

0cr13al4 Stainless Steel Strip Resistance Alloy Strip for Medical Machinery
 

Chemical Content, %

C	P		S	Mn	Si	Cr	Ni	Al	Fe	Other
Max
0.12		0.025	0.020	0.50	≤0.7	12.0~15.0	≤0.60	4.0~6.0	Balance	-

 
Mechanical Properties

Max Continuous Service Temperature: Resisivity 20ºC: Density: Thermal Conductivity: Coefficient of Thermal Expansion: Melting Point: Elongation: Micrographic Structure: Magnetic Property:

950ºC 1.25ohm mm2/m 7.40g/cm3 52.7 KJ/m·h·ºC 15.4×10-6/ºC (20ºC~1000ºC) 1450ºC Min 16% Ferrite magnetic

 
Temperature Factor of Electrical Resistivity

20ºC	100ºC	200ºC	300ºC	400ºC	500ºC	600ºC
1.000	1.005	1.014	1.028	1.044	1.064	1.090
700ºC	800ºC	900ºC	1000ºC	1100ºC	1200ºC	1300ºC
1.120	1.132	1.142	1.150	-	-	-

Feature:
With long service life.Heating up fast.High thermal efficiency.Temperature uniformity. Can use vertically. When being used in the rated voltage,there is no volatile matter.It i the ne environmental protection electric heating wire.And an alternative to the costly nichrome wire.Can be customized according to customer requirements

Usage:
It is widely used in industrial furnace, household electrical appliances, infrared heater, etc.

The key properties:
1.The thickness of surface insulation resistance to oxidation layer: 5-15 μ m.
2. Insulation resistance: multimeter detection infinity.
3.The voltage-endurance of insulating single layer is greater than the alternating voltage 60 ν without breakdown.
4. The use of voltage: 6-380 ν.
5. Using temperature: Maximum1200 ºC
6. Service life: not less than 6000 hours.
7.Thermal shock performance: Electric heating element can withstand the cold and hot impact 600-6000 times without deformation.