Thermal Spray Wire Ni95al5 Tafa 75b Nial 955 Used for Arc Spray Systems
Thermal Spray Wire is widely used in arc and flange flame spray systems, highly anti-corroision and anti-high temperature,
coatings to resist heat and prevent scaling of conventional low alloy steels,bond coats for improving the adhesion of top
coatings,coatings on moulds in the glass industry.
NiAl 95/5: Thermal Spray Wire (Sp 95/5, SD 95/5, Ni95Al5)
NiAl 95/5 is an austenitic nickel-aluminium alloy (NiAl alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding coatings.
(Common name:NiAl 95-5, Nickel Aluminum 95/5,N9,Ni95Al5,95/5 Nickel Aluminum,F-80NA Nickel Aluminium 95/5)
This alloy is a nickel aluminium alloy characterized by dense coating,high temperature oxidation resistance, heat shock resistance and scratch resistance.This wire has stable chemical composition, low oxgen and high bonding strength.
Typical applications for NiAl 95/5 are widely used in arc and flange flame spray systems, Coatings to resist heat and prevent scaling of conventional low alloy steels,Bond coats for improving the adhesion of top coatings,Coatings on moulds in the glass industry.
Normal composition%
| Al |
Mn |
Fe |
Ni |
Si |
Cu |
C |
Ti |
| 4.5-5.5 |
Max 0.3 |
Max 0.3 |
Bal. |
Max 0.5 |
Max 0.08 |
Max 0.005 |
Max 0.3 |
Typical Physical properties
| Density (g/cm3) |
8.2 |
| Electrical resistivity at 20ºC(mm2/m) |
0.42 |
Typical Deposit Characteristics
| Coating Harness |
Coating Strength |
Deposit Rate |
Deposit Efficiency |
Machilityineab |
| 23-25 HRC |
65-68Mpa |
10 lbs /hr/100A |
60-70% |
Good |
| Melting point (ºC) |
1010 |
| Max continuous operating temperature in air (ºC) |
800 |
| Magnetic properties |
non-magnetic |
Audited Supplier 
){kind=link}
){kind=link}