Molybdenum wire for Thermal Spraying

• Application: Aviation, Electronics, Industrial, Medical, Chemical, Anti galling
• Standard: JIS, GB, DIN, BS, ASTM, AISI, ISO9001:2008
• Purity: -
• Alloy: Alloy
• Type: Nickel Wire
• Powder: Not Powder
• Model NO.: Pure Molybdenum
• Typical Hardnedd: HRC 15-35
• Bond Strength: 7900 psi
• Deposit Rate: 10 lbs/hr/100A
• Deposit Efficiency: 75%
• Transport Package: Packing in Coil Cartons, Pallet, Spools, Coils
• Specification: 1.6mm, 3.2mm
• Trademark: TANKII
• Origin: Shanghai, China
• HS Code: 75052200
• Production Capacity: 2000tons/Year

Product Description

Molybdenum wire for Thermal Spraying

 

Production Introduction:
Molybdenum is a pure(99.5%) wire specifically designed for thermal spraying. It produces dense, well-bonded coatings with excellent wear resistance and good corrosion resistance. It is particularly effective for applications where scuffing or galling is a problem, such as piston rings, shift forks and synchronizing rings.

Surface Preparation:
Surface should be clean, white metal, with no oxides(rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.