0.2mm 0.3mm 0.4mm 0.5mm thickness thermocouple strip k type strip

• Dia: 0.3/0.5/0.8/1.0/1.2/1.6/2.0/2.5/3.2mmm
• Surface: Bright/ oxidized
• Grade: I/II/III
• Tensile strength: more than 390
• Item: 20 AWG EP EN Thermocouple wire (Type E)
• EP: NiCr thermocouple wire
• Model NO.: K
• EN: CuNi thermocouple wire
• TP: Cu thermocouple wire
• TN: CuNi thermocouple wire
• JP: Fe thermocouple wire
• Transport Package: 100m/Coil 200m/Coil
• Specification: 0.2mm 0.5mm 0.75mm 1.0mm
• Trademark: Tankii
• Origin: Shanghai
• HS Code: 90259000
• Production Capacity: 5000ton Per Year

Product Description

0.2mm 0.3mm 0.4mm 0.5mm thickness thermocouple strip k type strip

A Thermocouple is a sensor used to measure temperature. Thermocouples consist of two wire legs made from different metals. The wires legs are welded together at one end, creating a junction. This junction is where the temperature is measured. When the junction experiences a change in temperature, a voltage is created. The voltage can then be interpreted using thermocouple reference tables to calculate the temperature.
 
NiCr- CuNi thermocouple wire (type E) is also named NiCr-Constantan thermocouple. It has a stronger signal & higher accuracy than the Type K or Type J at moderate temperature ranges of 1,000F and lower. The type E is also more stable than the type K, which adds to its accuracy.

Type E thermocouple wire  has the largest EMF output and highest sensitivity, so it is ideal for measuring small temperature change. It also has good stability in the low temperature range up to 300ºC, and good property of anti-corrosion in humidity atmosphere. It is recommended for oxidizing or inert atmospheres, but cannot be used directly in reducing atmosphere and atmosphere with sulphur gases.

Application of thermocouple :
Heating - Gas burners for ovens
Cooling - Freezers
Engine protection - Temperatures and surface temperatures
High temperature control - Iron casting


Parameters of thermocouple 

Chemical Composition
Conductor Name	Polarity	Code	Nominal Chemical Composition /%
			Ni	Cr	Cu
NiCr	Positive	EP	90	10	--
Cu-Ni(Constantan)	Negative	EN	45	--	55