NiCu Alloy Thermal Spraying Wire
Chemical Element:
Ni 63.0min, Cu 28min~34max, Fe2.5max, Mn 2.0max, C 0.3max, Si 0.5max, S 0.024max
Characteristic as below:
NiCu Alloy Thermal Spraying Wire is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy and fluoride gas medium with excellent corrosion resistance, as well as to the hot concentrated alkali. At the same time, is also corrosion resistant to neutral solution, sea water, air, organic compounds. An important feature of this is generally do not generate a stress corrosion cracking, good cutting performance.
Metallurgical structure
NiCu Alloy Thermal Spraying Wire is high-intensity single-phase solid solution.
Corrosion resistance
NiCu Alloy Thermal Spraying Wire in the fluoride gas, hydrochloric acid, sulfuric acid, and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: Monel 400 have corrosion resistance in less than 85% consistency of sulfuric acid. Monel 400 is an important material that resistant to acid. Water corrosion: Monel 400 alloy in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: Monel 400 for the work of the highest temperature at about 600 degree in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: Monel 400 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 degree due to the high nickel.
Audited Supplier 
){kind=link}
){kind=link}