6j13 Manganin strip shunt manganin
Manganin Strip/Tape/Roll 0.5mm*85mm
Product Description
Shunt Manganin widely used for Shunt resistor with the highest requirements, shunt manganin has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.
Chemical Content, %
| Ni |
Mn |
Fe |
Si |
Cu |
Other |
ROHS Directive |
| Cd |
Pb |
Hg |
Cr |
| 2~5 |
11~13 |
<0.5 |
micro |
Bal |
- |
ND |
ND |
ND |
ND |
Mechanical Properties
| Max Continuous Service Temp |
0-100ºC |
| Resisivity at 20ºC |
0.44±0.04ohm mm2/m |
| Density |
8.4 g/cm3 |
| Thermal Conductivity |
40 KJ/m·h·ºC |
| Temp Coefficient of Resistance at 20 ºC |
0~40α×10-6/ºC |
| Melting Point |
1450ºC |
| Tensile Strength(Hard) |
585 Mpa(min) |
| Tensile Strength,N/mm2 Annealed,Soft |
390-535 |
| Elongation |
6~15% |
| EMF vs Cu, μV/ºC (0~100ºC) |
2(max) |
| Micrographic Structure |
austenite |
| Magnetic Property |
non |
| Hardness |
200-260HB |
| Micrographic Structure |
Ferrite |
| Magnetic Property |
Magnetic |
Resistance Alloy- Shunt Manganin Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft
Wire &Ribbon diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm
Also enameled condition is available
Audited Supplier 
){kind=link}