Nickel 200 pure nickel sheet

• Customization: Available
• Application: Electronics, Industrial, Chemical
• Standard: JIS, GB, DIN, ASTM
• Model NO.: Nickel 200
• Purity: >99.5%
• Alloy: Non-alloy
• Type: Nickel Strip
• Powder: Not Powder
• sample: free
• Width: 200mm
• Surface: Bright
• Condition: Soft 1/4H 1/2H Hard
• Elongation: 35%
• Density: 8.89g/cm3
• melting point: 1440C
• Name: N02201
• Shape: Sheet
• Transport Package: Strand Packing
• Specification: 0.02*100mm
• Trademark: TANKII
• Origin: Shanghai
• HS Code: 7506100000
• Production Capacity: 500Tons/year

Product Description

Nickel 200 pure nickel sheet

Grade:Ni200,Ni201,N4,N6
High ductility
Excellent corrosion resistance 
good mechanical strength
 
Nickel foil and nickel strip for battery
 
Pure nickel grade:  Ni200,Ni201, N4,N6
 
Alloy Description  
 
Nickel 200/201 is most widely used grade, generally specified for transistor caps, anodes for electronic tubes, leads of electronic components / Lead-in-Wires for lamps and for Wire-Mesh. Also used in strip form for various applications including Ni-Cd batteries.
 
Condition of Supply
 
Nickel 200, 201 and 205 are supplied in the following conditions:
Cold Drawn, Special Temper.
Cold Drawn, Annealed. Straightened and Cut Lengths.
Note: 
 
NUS N02201 (ASTM B 162) same as N4 (GB/T 2054).
 
NUS N02200 (ASTM B 162) same as N6 (GB/T 2054).
 
Forms
 
Coil - Strip, Foil, Ribbon
Wire - Profile, Round, Flat, Square
rod, bar, forgings, plate, sheet
 
Chemical composition  
 

Grade	Ni+Co	Cu	Si	Mn	C	Mg	S	P	Fe
N4	99.9	0.015	0.03	0.002	0.01	0.01	0.001	0.001	0.04
N6	99.6	0.10	0.10	0.05	0.10	0.10	0.005	0.002	0.10
Ni201	99.0	≤0.25	≤0.35	≤0.35	≤0.02	/	≤0.01	/	≤0.40
Ni200	99.0	0.20	0.30	0.30	0.15	/	0.01	/	0.40

 
Nickel Foil Capabilities  
 

Grade	Pure Nickel Strip 99.6% / 99.9%
Thickness	0.002 to 2.50 mm
Tolerances	+/- 5% (special tolerances is available)
Width	Up to 350mm wide
Coil size	Up to 80 kg without welds
Temper Ranges	Annealed to Full Hard

 
Nickel Foil Product Precision   

 

Thickness	Thickness allowance	Burr height	Width scope and tolerance
			2≤w<10	10≤w<50	50≤w<100	100≤w<150	150≤w<200	200≤w
0.02≤t<0.05	±0.003	≤0.005	± 0.05	±0.10	±0.15	±0.20	±0.30	±0.50
0.05≤t<0.1	±0.005	≤0.01
0.1≤t<0.2	±0.008	≤0.015
0.2≤t<0.3	±0.012	≤0.02
0.3≤t<0.4	±0.015	≤0.03	± 0.10	±0.15	±0.25	±0.50	±0.80	±1.00
0.4≤t<0.6	±0.025	≤0.05
0.6≤t<0.8	±0.030	≤0.06	± 0.30	±0.40	±0.50	±0.50	±0.80	±1.00
0.8≤t<1.0	±0.040
1.0≤t<1.2	±0.050	≤0.08	± 0.50	±0.50	±0.80	±1.00	±1.00	±1.50
1.2≤t<1.4	±0.060
1.4≤t<1.7	±0.070	≤0.10
1.7≤t<2.0	±0.080