Tankii Constantan alloy heating wire(6j40)

• Customization: Available
• Product Type: Wire
• Material: CuNi Alloy Wire
• Model NO.: 6j40
• PCD: None
• ET: None
• Hole: None
• Serves: Small Oreder Accepted
• Sample Free: Available
• Transport Package: Coil Cartons, Pallet, Spools, Coils
• Specification: ROHS, SGS
• Trademark: TANKII
• Origin: China
• HS Code: 7409400000
• Production Capacity: 200 Tons/Year

Product Description

Constantan Eureca  Wire / Flat Wire
Product Description
      Constantan Wire with moderate resistivity and low temperature coefficent of resistance with a flat resistance/temperature curve over a wider range than the "manganins". Constantan also shows better corrosion resistance than the man ganins. Uses tend to be restricted to ac circuits.
     Constantan wire is also the negative element of the type J thermocouple with Iron being the positive; type J thermocouples are used in heat treating applications. Also, it is the negative element of the type T thermocouple with OFHC Copper the positive; type T thermocouples are used at cryogenic temperatures.
 
Chemical Content, %

Ni	Mn	Fe	Si	Cu	Other	ROHS Directive
						Cd	Pb	Hg	Cr
44	1.50%	0.5	-	Bal	-	ND	ND	ND	ND

Mechanical Properties

Max Continuous Service Temp	400ºC
Resisivity at 20ºC	0.49±5%ohm mm2/m
Density	8.9 g/cm3
Thermal Conductivity	-6(Max)
Melting Point	1280ºC
Tensile Strength,N/mm2   Annealed,Soft	340~535 Mpa
Tensile Strength,N/mm3   Cold Rolled	680~1070 Mpa
Elongation(anneal)	25%(Min)
Elongation(cold rolled)	≥Min)2%(Min)
EMF vs Cu, μV/ºC (0~100ºC)	-43
Micrographic Structure	austenite
Magnetic Property	Non