• low resistances copper nickel alloy 90 wire
  • low resistances copper nickel alloy 90 wire
  • low resistances copper nickel alloy 90 wire
  • low resistances copper nickel alloy 90 wire
  • low resistances copper nickel alloy 90 wire
  • low resistances copper nickel alloy 90 wire

low resistances copper nickel alloy 90 wire

Product Type: Strip
Material: Cu/Ni
Carbon Content: No
PCD: 100mm
ET: 15mm
Hole: 5
Customization:

Contact Supplier

Diamond Member Since 2008

Suppliers with verified business licenses

Basic Info.

Model NO.
Alloy90
Serves
Small Order Accepted
Sample
Sample Available
standard
GB/ASTM/JIS/BIS/DIN
colour
RED
Transport Package
in Coil Cartons, Pallet, Spools, Coils
Specification
0.01-10mm
Trademark
Tankii
Origin
China
HS Code
74082200
Production Capacity
2000tons/Year

Product Description

low resistances copper nickel alloy 90 wire

Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi20, CuNi23, CuNi25, CuNi30, CuNi34, CuNi44.
Wire/Rod/Bar diameter: 0.02mm-30mm
Strip: Thickness0.01~6.0width: 610Max
CuNi10, also known as Cuprothal 15, is a copper-nickel alloy (CuNi alloy) with medium-low resistivity for low temperature resistances. The alloy is suitable for use at temperatures up to 400°C (750°F).
CuNi10 is typically used for heating cables, fuses, resistors and various types of controllers.

Material: CuNi10(C70600) CuNi30(C71500) in from of sheet/plate/strip

CuNi10Fe1/C70600 Strip/sheet
Copper Nickels (Copper-Nickel), Copper-Nickel, (90-10). Excellent corrosion resistance, especially in marine environments. Moderately high strength, good creep resistance at elevated temperatures. Properties generally increase with nickel content. Relatively high in cost compared with copper-aluminum and other alloys with similar mechanical propert
Characteristic Resistivity ( 200C μ Ω . m) Max. working Temperature ( 0C) Tensile Strength (Mpa) Melting point (0C) Density ( g/cm3) TCR x10-6/ 0C (20~600 0C) EMF vs Cu (μ V/ 0C) (0~100 0C)
Alloy Nomenclature
NC035(CuNi30) 0.35± 5% 300 350 1150 8.9 < 16 -34
 
Mechanical Properties Metric Comments
Tensile Strength, Ultimate  372 - 517 MPa  
Tensile Strength, Yield  88.0 - 483 MPa Depending on temper
Elongation at Break  45.0 % in 381 mm.
Modulus of Elasticity  150 GPa  
Poissons Ratio  0.320 Calculated
Charpy Impact  107 J  
Machinability  20 % UNS C36000 (free-cutting brass) = 100%
Shear Modulus  57.0 GPa  

low resistances copper nickel alloy 90 wire

low resistances copper nickel alloy 90 wire

 

Send your message to this supplier

*From:
*To:
avatar Mr. Martin
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now