Copper Nickel Alloy Constantan Strip CuNi40 / CuNi44 Constant

• Customization: Available
• Product Type: Strip
• Material: CuNi Alloy Strip
• Model NO.: CuNi44
• Carbon Content: N/A
• PCD: N/A
• ET: N/A
• Hole: N/A
• Serves: Small Oreder Accepted
• Sample Free: Available
• standard: GB/ASTM/JIS/BIS/DIN
• colour: silver white
• Transport Package: Coil Cartons, Pallet, Spools, Coils
• Specification: 0.01-3mm*0.3-600mm
• Trademark: TANKII
• Origin: China
• HS Code: 7409400000
• Production Capacity: 2000 Tons/Year

Product Description

Copper Nickel Alloy Constantan Strip CuNi40 / CuNi44  Constant

Product Description
Constantan Strip with moderate resistivity and low temperature coefficent of resistance with a flat resistance/temperature curve over a wider range than the "manganins". Constantan also shows better corrosion resistance than the man ganins. Uses tend to be restricted to ac circuits.
Constantan is also the negative element of the type J thermocouple with Iron being the positive; type J thermocouples are used in heat treating applications. Also, it is the negative element of the type T thermocouple with OFHC Copper the positive; type T thermocouples are used at cryogenic temperatures.
 
Chemical Content, %

Ni	Mn	Fe	Si	Cu	Other	ROHS Directive
						Cd	Pb	Hg	Cr
44	1.50%	0.5	-	Bal	-	ND	ND	ND	ND

Mechanical Properties

Max Continuous Service Temp	400ºC
Resisivity at 20ºC	0.49±5%ohm mm2/m
Density	8.9 g/cm3
Thermal Conductivity	-6(Max)
Melting Point	1280ºC
Tensile Strength,N/mm2   Annealed,Soft	340~535 Mpa
Tensile Strength,N/mm3   Cold Rolled	680~1070 Mpa
Elongation(anneal)	25%(Min)
Elongation(cold rolled)	≥Min)2%(Min)
EMF vs Cu, μV/ºC (0~100ºC)	-43
Micrographic Structure	austenite
Magnetic Property	Non

Our Services
a) We can provide high quality material, excellent design, precise manufacturing,complete specifications, considerate and integrity serivices.
b)  We can provide all kinds of electric heating alloy material and elements, including customized products.
c)  We can provide a complete solution for you.
d)  OEM service can be provided.
e)  Product selection
f)  Process optimization
g)  New product development