Manganin Strip / Wire (6J12 / 6J8 / 6J13)  for Resistor

Product Details
Customization: Available
Product Type: Wire
Material: MnCu
Diamond Member Since 2008

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Management System Certification
ISO 9001, ISO 14001
  • Manganin Strip / Wire (6J12 / 6J8 / 6J13)  for Resistor
  • Manganin Strip / Wire (6J12 / 6J8 / 6J13)  for Resistor
  • Manganin Strip / Wire (6J12 / 6J8 / 6J13)  for Resistor
  • Manganin Strip / Wire (6J12 / 6J8 / 6J13)  for Resistor
  • Manganin Strip / Wire (6J12 / 6J8 / 6J13)  for Resistor
  • Manganin Strip / Wire (6J12 / 6J8 / 6J13)  for Resistor
Find Similar Products

Basic Info.

Model NO.
6J12 / 6J8 / 6J1
Carbon Content
Low Carbon
Serves
Small Order Acceptable
Transport Package
in Spool
Specification
IEC60317-8, GB/T6109.5.2008
Trademark
TANKII
Origin
China
HS Code
85441100
Production Capacity
2000tons/Year

Product Description

Material: CuNi1, CuNi2, CuNi4, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44,

constantan, manganin, karma in form of wire/ribbon

Common temperature classes are 130, 155, 180, 200, 220C
Enamelled Wire diameter: 0.02 mm~1.8mm round
Detailed Description Manganin foil and wire is used in the manufactur of resistor, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance value and long term stability.

Enameled wire is a wire coated with a thin layer of insulation to prevent the wire surfaces from being in a short circuit when wound into coils. Magnetic flux is created when current flows through the coil. It is used mainly in the construction of motors, electromagnets, transformers and inductors. For ease of manufacturing inductive components like transformers and inductors, most of these wires can be soldered.

Enameled wires are classified by their diameter (AWG gauge number or millimetres), temperature class and insulation thickness. A thicker insulation layer results in a higher breakdown voltage (BDV). Common temperature classes are 130, 155, 180 and 200 ° C.

Due to the different characteristics of metal wire, wire enamelled coated with the different production processes, in the years of production practice, gradually we formed in the different needs of different materials coated enamelled techniques, especially in resistance wire, we can provide all kinds of production for resistance potentiometer constantan enameled wire, nichrome enameled wire, and kamar enameled wire, etc. We also in platinic gold, silver, gold plating coating on a successful experience in production. We can customize various special metal wire enameled wire. Its purpose is not confined to the resistance and the potentiometer production materials, such as sensors, etc.



Chemical Content(%)
       

Mn

Ni

Cu

Si

Fe

 11~13

 2~3

Bal

  Microscale

 <0.5

 Mechanical Properties 
            

Density

8.44 g/cm3

Operating temperature range 

5~45ºC 

Temperature Coefficient of Resistance 

-3~+20 *10-6 /ºC 

EMF VS Cu(0~100 ºC)

  1μV/ºC

Resistivity (20ºC)

0.47 ±0.03 ohm*mm2/m

Elongation

Min15%

Manganin Strip / Wire (6J12 / 6J8 / 6J13) for Resistor
Manganin Strip / Wire (6J12 / 6J8 / 6J13) for Resistor
Manganin Strip / Wire (6J12 / 6J8 / 6J13) for Resistor


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier