Copper based Manganin alloy Strip / wire 6J11

• Customization: Available
• Product Type: Strip
• Material: copper alloy
• Model NO.: 6J11
• Carbon Content: Low Carbon
• PCD: 120mm
• ET: 15mm
• Hole: 5
• State: soft, hard
• surface: bright
• standard: GB/ASTM
• Density: 8.9g/cm3
• OEM: Yes
• Sample: Small Order Accepted
• MOQ: 20kilograms
• Width: 0.2-300mm
• Thickness: 0.001-3mm
• Transport Package: in Roll/Coil/Spool
• Specification: 0.01-3mm*0.5-300mm
• Trademark: TANKII
• Origin: Shanghai, China
• HS Code: 7409400000
• Production Capacity: 2000ton/Year

Product Description

Copper based Manganin alloy Strip / wire 6J11

Chemical Content, %

Ni	Mn	Fe	Si	Cu	Other	RoHS Directive
						CD	Pb	Hg	Cr
-	10.5-12.5	-	-	Bal	-	ND	ND	ND	ND

Mechanical Properties

Max Continuous Service Temp	0-45ºC
Resisivity at 20ºC	0.49±0.03ohm mm2/m
Density	8.G/cm3
Temp Coefficient of Resistance at 20 ºC	-80~+80α×10-6/ºC
Melting Point	1450ºC
Tensile Strength(Hard)	635 MPa(min)
Tensile Strength,N/mm2   Annealed,Soft	340~535
Elongation	15%(min)
EMF vs Cu, μV/ºC (0~100ºC)	2
Micrographic Structure	Austenite
Magnetic Property	Non
Micrographic Structure	Ferrite
Magnetic Property	Magnetic

Mechanical Properties
 

Type	Electrical resistivity (20degreeΩ mm²/m)	temperature coefficient of resistance (10^6/degree)	Dens ity g/mm²	Max. temperature (°c)	Melting point (°c)
CuNi1	0.03	<1000	8.9	/	1085
CuNi2	0.05	<1200	8.9	200	1090
CuNi6	0.10	<600	8.9	220	1095
CuNi8	0.12	<570	8.9	250	1097
CuNi10	0.15	<500	8.9	250	1100
CuNi14	0.20	<380	8.9	300	1115
CuNi19	0.25	<250	8.9	300	1135
CuNi23	0.30	<160	8.9	300	1150
CuNi30	0.35	<100	8.9	350	1170
CuNi34	0.40	-0	8.9	350	1180
CuNi40	0.48	±40	8.9	400	1280
CuNi44	0.49	<-6	8.9	400	1280

Application of Manganin
Manganin strip and wire is used in the manufacture of resistor, Particularly ammeter shunt, because of its virtually zero temperature coefficient of resistance value and long term stability.
1.Packing detail
1).Coil (plastic spool) + compressed ply-wooden case + pallet
2).Coil (plastic spool) + carton + pallet