CuNi 294 Copper nickel alloy wire

• Customization: Available
• Product Type: Wire
• Material: Copper and Nickel
• Model NO.: CuNi 294
• Resistivity: 0.49+-5%
• Density: 8.9(g/cm3)
• Elongation: >25%
• Melting Point: 1280
• State: Annealed and Hard
• Surface: Bright
• Other Name: Nc050
• Transport Package: Spool/Coil, Carton, Wooden Case
• Specification: RoHS, ISO 9001
• Trademark: Tankii
• Origin: China
• Production Capacity: 500 Tons/Year

Product Description

CuNi 294 Copper nickel low resistance alloy wire

Constantan Wire Definition
Resistance alloy with moderate resistivity and low temperature coefficent of resistance with a flat resistance/temperature curve over a wider range than the "manganins". Uses tend to be restricted to ac circuits. Constantan is also the negative element of the type J thermocouple with Iron being the positive; type J thermocouples are used in heat treating applications. Also, it is the negative element of the type T thermocouple with OFHC Copper the positive; type T thermocouples are used at cryogenic temperatures.
 
Chemical Content, %

Ni	Mn	Fe	Si	Cu	Other	ROHS Directive
						Cd	Pb	Hg	Cr
44	1.50%	0.5	-	Bal	-	ND	ND	ND	ND

Mechanical Properties

Max Continuous Service Temp	400ºC
Resisivity at 20ºC	0.49±5%ohm mm2/m
Density	8.9 g/cm3
Thermal Conductivity	-6(Max)
Melting Point	1280ºC
Tensile Strength,N/mm2   Annealed,Soft	340~535 Mpa
Tensile Strength,N/mm3   Cold Rolled	680~1070 Mpa
Elongation(anneal)	25%(Min)
Elongation(cold rolled)	≥Min)2%(Min)
EMF vs Cu, μV/ºC (0~100ºC)	-43
Micrographic Structure	austenite
Magnetic Property	Non