Electric Heat Resistant 0Cr15Al5 Fecral Wire For Furnace

• Product Type: Wire
• Material: FeCrAl
• Carbon Content: Low Carbon
• PCD: 112mm
• ET: 45mm
• Hole: 4
• Model NO.: 0Cr15Al5
• color: oxidable
• Transport Package: Standard Packing
• Specification: Fe Bal, Cr 15%, Al 5%
• Trademark: TANKII
• Origin: Shanghai
• Production Capacity: 200 Ton/Year

Product Description

0Cr15Al5 FeCrAl Electric Heating Resistance Alloy Wire for Furnace

 

Introduction

 

1)Alloy grades:
OCr21Al4, OCr21Al6, OCr25Al5, OCr23Al5, 1Cr13Al4, OCr21Al6Nb, Cr15Ni60, Cr20Ni80, Cr30Ni70, Cr20Ni30 etc.
We are the greatest professional manufacturers of resistance heating alloys in China, specializing in Ferro-Chrome Alloys (Ferritic Alloys), Nickel-Chrome Alloys (Nichrome alloys), Copper Nickel Alloys (Constantan Alloys)
In the form of wire, ribbon/strip:
Round Wire: Dia 0.04mm-8.0mm
Ribbon/strip: Thickness: 0.04mm-0.75mm
Width: 0.08mm-6.0mm

 

Max Continuous Service Temperature: Resisivity 20'C Density: Thermal Conductivity: Coefficient of Thermal Expansion: Melting Point: Elongation: Micrographic Structure: Magnetic Property:

1300'C 1.35+/-0.06ohm mm2/m 7.25g/cm3 60.2 KJ/m@h@'C 15.0×10-6/'C (20'C~1000'C) 1500'C Min 12% Ferrite magnetic

2) Product Specifications:
Ferro-Chrome Alloys (Ferritic Alloys):
OCr21AL4, OCr21AL6, OCr25AL5, OCr23AL5, 1Cr13AL4, OCr21AL6Nb, OCr27AL7Mo2.
Nickel-Chrome Alloys (Ni-Cu Alloys):
Cr20Ni80, Cr15Ni60, Cr30Ni70, Cr20Ni30
Constantan Alloys (Cu-Ni Alloys):
CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuNi30, CuNi44, Manganin.

3) High quality assured:
Our works has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products, together with the chemical analysis department, the physical testing department and the quality control department, we operate an all-round monitoring of our products from raw materials to final products.

4) Usage: Resistance heating elements; Material in metallurgy; Household appliances; Mechanical manufacturing and other industries.
5)We can also supply other products by processing on your order: Stranded wire, twisted wire, coiled wire, wave-shaped wires and different kinds of standard or non-standard electrical heating element.
Shanghai TANKII ALLOY MATERIAL Co., Ltd.
FECRAL AND ALCHROME ALLOY PRODUCER IN China, MOST PROFESSIONAL IN THE WORLD

Chemical Composition (%)

Alloy	C	P	S	Mn	Si	Cr	Ni	Al	Fe
0Cr15Al5	0.12	0.025	0.025	0.7	≤1.00	14.5-15.5	-	4.5-5.3	Rest

Properties

Alloy	0Cr15Al5
Yield strength(MPa)	590-690
Elongation (%)	> 12
Density g/cm3	7.15
·Electrical resistivity (Ωmm2 / m)	1.30 ± 0.05
The highest temperature continuous operation (° C)	750
Melting point (° C)	1500
Thermal conductivity (kJ / m * h * ° C)	52.4
Coefficient of linear expansion (α×10-6 / ° C)	6.15

Mesh Specification

Wire Mesh

GB/T 5330.1 ; GB/T 17492 ; JB/T 9155

0.5-250 mesh/Inch; Thickness: Min0.05mm

Manufacture Process

The manufacture of mesh is started with producing wire. The wire production includes: forging, rolling, annealing and drawing. The wire with right material and wire diameter will be produced. Then the warp wires will be put and prepared on the weaving machine, and then start weaving. From wire to mesh, manufacture process is operated with high standard quality control system. There will be quality test for each batch of product, such as test to diameter tolerance, content, mesh aperture, etc.

Packing Process & Transportation

Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

Transportation: By air or By sea