Nickel Alloy Nial 80/20 Tafa 79b Metco 405ns Thermal Spray Alloy Wire

• Customization: Available
• Application: Aviation, Electronics, Industrial
• Standard: GB, ASTM
• Model NO.: Nial 80/20
• Purity: 80%
• Alloy: Alloy
• Type: Nickel Wire
• Powder: Not Powder
• Weight of Per Coil: 15kg
• Surface: Bright and Smooth
• Transport Package: 15kg/Spool
• Specification: 1.6mm, 2.0mm, 3.175mm
• Trademark: tankii
• Origin: China
• HS Code: 8311100000

Product Description

Nickel Alloy Nial 80/20 Tafa 79b Metco 405ns Thermal Spray Alloy Wire

Thermal Spray Wire is widely used in arc and flange flame spray systems, highly anti-corroision and anti-high temperature,
coatings to resist heat and prevent scaling of conventional low alloy steels,bond coats for improving the adhesion of top
coatings,coatings on moulds in the glass industry.

NiAl 95/5: Thermal Spray Wire (Sp 95/5, SD 95/5, Ni95Al5) 
 

NiAl 95/5 is an austenitic nickel-aluminium alloy (NiAl alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding coatings.

(Common name:NiAl 95-5, Nickel Aluminum 95/5,N9,Ni95Al5,95/5 Nickel Aluminum,F-80NA Nickel Aluminium 95/5)
 
This alloy is a nickel aluminium alloy characterized by dense coating,high temperature oxidation resistance, heat shock resistance and scratch resistance.This wire has stable chemical composition, low oxgen and high bonding strength.
 
Typical applications for NiAl 95/5 are widely used in arc and flange flame spray systems, Coatings to resist heat and prevent scaling of conventional low alloy steels,Bond coats for improving the adhesion of top coatings,Coatings on moulds in the glass industry.
Normal composition%

NiAl 80/20 can be used as an adhesive coating and require minimal surface treatment. Bond strengths in excess of 9000 psi can be obtained on blasting surfaces of gravel. It has good resistance to high temperature oxidation and abrasion, and excellent resistance to impact and bending.

Product Details
Chemical composition:

Grade	Nominal composition	Al %	Ni %
NiAl 80/20	Min	20.0
	Max		Bal.

Typical Characteristics:

Typical Hardness	Bond Strength	Deposit Rate	Deposit Efficiency	Machilityineab
HRB 60-75	9100 psi	10 lbs /hr/100A	60-70%	Good

Sizes & Packaging:

Diameter	Packaging	Wire Weight
1/8" (3.17mm)	MIG (D 300)	5kg((33 lb)/spool

Note that special sizes, or packing requirements are available on all requests.

Thermal spray coating wire

Thermal Spray Wire is widely used in arc and flange flame spray systems, highly anti-corroision and anti-high temperature,
coatings to resist heat and prevent scaling of conventional low alloy steels,bond coats for improving the adhesion of top
coatings,coatings on moulds in the glass industry.

Item	Inconel 625	Ni95Al5	45CT	Monel 400	Monel 500	HC-276	Cr20Ni80
C	≤0.05	≤0.02	0.01-0.1	≤0.04	≤0.25	≤0.02	≤0.08
Mn	≤0.4	≤0.2	≤0.2	2.5-3.5	≤1.5	≤1.0	≤0.06
Fe	≤1.0	N/A	≤0.5	≤1.0	≤1.0	4.0-7.0	N/A
P	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01	≤0.02
S	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01
Si	≤0.15	≤0.2	≤0.2	≤0.15	≤0.5	≤0.08	0.75-1.6
Cu	N/A	N/A	N/A	rest	27-33	N/A	N/A
Ni	rest	rest	rest	65-67	rest	rest	rest
Co	N/A	N/A	N/A	N/A	N/A	N/A	N/A
Al	≤0.4	4-5	N/A	≤0.5	2.3-3.15	N/A	N/A
Ti	≤0.4	0.4-1	0.3-1	2.0-3	0.35-0.85	N/A	N/A
Cr	21.5-23	≤0.2	42-46	N/A	N/A	14.5-16	20-23
Nb	3.5-4.15	N/A	N/A	N/A	N/A	N/A	≤1.0
Mo	8.5-10	N/A	N/A	N/A	N/A	15-17	N/A
V	N/A	N/A	N/A	N/A	N/A	≤0.35	N/A
W	N/A	N/A	N/A	N/A	N/A	3.0-4.5	N/A
Impurities	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5

 

 
Typical Physical properties

Density (g/cm3)	8.2
Electrical resistivity at 20ºC(mm2/m)	0.42

Typical Deposit Characteristics

Coating Harness	Coating Strength	Deposit Rate	Deposit Efficiency	Machilityineab
23-25 HRC	65-68Mpa	10 lbs /hr/100A	60-70%	Good

 

Specific heat capacity

 

Melting point (ºC)	1010
Max continuous operating temperature in air (ºC)	800
Magnetic properties	non-magnetic