| Product Type: | Wire |
|---|---|
| Material: | CuNi Alloy Wire |
| Carbon Content: | None |
| PCD: | None |
| ET: | None |
| Hole: | None |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Product Indroduction:
Constantan is CuNi40,also named 6J40,it is a resistance alloy which is mainly made up of copper and nickel.
It has the low resistance temperature coefficient,wide working temperature scope(500 below),good machiningproperty,anti-corrosive and easy braze welding.
The alloy is non-magnetic. It is used for electricalregenerator's variable resistor and the strain resistor,
potentiometers, heating wires, heating cables and mats. Ribbons are used for heating of bimetals. Another field of application is manufacturing of thermocouples because it develops a high electromotive force (EMF) in association with others metals.
Material Composition:
Ni |
Mn |
Fe |
Si |
Cu |
Other |
ROHS Directive |
|||
Cd |
Pb |
Hg |
Cr |
||||||
44 |
1.50% |
0.5 |
- |
Bal |
- |
ND |
ND |
ND |
ND |
Max Continuous Service Temp |
400ºC |
Resisivity at 20ºC |
0.49±5%ohm mm2/m |
Density |
8.9 g/cm3 |
Thermal Conductivity |
-6(Max) |
Melting Point |
1280ºC |
Tensile Strength,N/mm2 Annealed,Soft |
340~535 Mpa |
Tensile Strength,N/mm3 Cold Rolled |
680~1070 Mpa |
Elongation(anneal) |
25%(Min) |
Elongation(cold rolled) |
≥Min)2%(Min) |
EMF vs Cu, μV/ºC (0~100ºC) |
-43 |
Micrographic Structure |
austenite |
Magnetic Property |
Non |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}