| Standard: | GB |
|---|---|
| Certification: | ISO |
| Surface Treatment: | Galvanized |
| Technique: | Cold Rolled |
| Application: | circuit breaker |
| Stock: | Not Stock |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | shop sign | G.Rau NI | |
| With brand | ||
| Composite layer alloybrand |
High expansion layer | Ni |
| middle layer | -------- | |
| Low expansion layer | Ni36 | |
| shop sign | Ni | Cr | Fe | Co | Cu | Zn | Mn | Si | C | S | P |
| ≤ | |||||||||||
| Ni36 | 35.0~37.0 | - | allowance | - | - | - | ≤0.6 | ≤0.3 | 0.05 | 0.02 | 0.02 |
| Ni | ≤99.3 | - | ≤0.15 | - | ≤0.15 | - | - | ≤0.15 | 0.15 | - | 0.015 |
| Than bending K(20~135ºC) | Temperature curvature F/(greenhouse ~ 130 ºC) |
resistivity | Linear temperature / ºC |
Allows the use of temperature / ºC | Density (g/cm after) | |||
| Nominal value | Allowable deviation | Standard values | Allowable deviation | |||||
| Level 1 | Level 2 | |||||||
| 10.0 | ±8% | ±10% | 19.0%±10% | 0.17 | ±10% | -20~180 | -70~400 | 8.4 |
| Modulus of elasticity E/GPa |
Hardness (HV) | Tensile strength MPa |
Allow stress MPa | ||
| High expansion layer | Low expansion layer | minimum | biggest | ||
| 152~181 | 185~235 | 200~255 | 588~686 | 98 | 294 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}