• Manganin Shunt In Energy Meter
  • Manganin Shunt In Energy Meter
  • Manganin Shunt In Energy Meter
  • Manganin Shunt In Energy Meter

Manganin Shunt In Energy Meter

Classification: Light Metal
Min Thickness: 0.01mm
Resisivity: 0.47ppm
Elongation Rate: 15(Min)
Tensile Strength(Hard): 635MPa(Min)
Sample: Small Order Accepted
Customization:

Contact Supplier

Diamond Member Since 2008

Suppliers with verified business licenses

Basic Info.

Model NO.
6J13
standard
GB/ASTM/JIS/BIS/DIN
surface
bright
Density
8.4(g/cm3)
MOQ
20kilograms
OEM
YES
Transport Package
in Roll, in Woodencase Outside
Specification
0.01-3mm*0.3-600mm
Trademark
Taknkii
Origin
China
HS Code
7409400000
Production Capacity
500t/Month

Product Description

Manganin Strip/Sheet/Foil /Cu86nn13ni2 Strip 
 
Product Description
Shunt Manganin widely used for Shunt resistor with the highest requirements, shunt manganin has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.
 
Chemical Content, %
Ni Mn Fe Si Cu Other ROHS Directive
Cd Pb Hg Cr
2~5 11~13 <0.5 micro Bal - ND ND ND ND
 
Mechanical Properties
Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.44±0.04ohm mm2/m
Density 8.4 g/cm3
Thermal Conductivity 40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC 0~40α×10-6/ºC
Melting Point 1450ºC
Tensile Strength(Hard) 585 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft 390-535
Elongation 6~15%
EMF vs Cu, μV/ºC (0~100ºC) 2(max)
Micrographic Structure austenite
Magnetic Property non
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic
 
Resistance Alloy- Shunt Manganin Sizes / Temper Capabilities
 Condition: Bright, Annealed, Soft 
 Wire &Ribbon diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
 Rod, Bar diameter 1mm-30mm 
 Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
 Also enameled condition is available

Product Description:
1 .Material:  6J13 manganin and pure copper (reach the GB614599 F2 standard)
2. Welding mode: Electric beam welding shunt. Braze welding with Ag-based alloy as solder.
3. Resistance value tolerance: ±5%
4. Shunt type: The shunt should be mountable type with holes for screw fixing
5. Termination: Integrated lead wires are available

6. Temperature: Independent from temperature variation with low TCR value,

7. Characteristics: TC < 50PPM/K

8. Aging: 10 hours under 120 deg.

9. Power loss: <50 mill watt

 Manganin Shunt In Energy Meter

Send your message to this supplier

*From:
*To:
avatar Mr. Martin
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now